Made with Stainless Steel and high-pressure water jets. The Barista Basics rinser can be used with any vessel with a diameter from 1 to 4½ inches. Rinses in seconds.
Product Details
- Stainless steel valve stem body for use with higher water pressure.
- Rinser star with a larger diameter and non-slip ridges.
- Certified by NSF International.
- All rinser units conform to NSF/ANSI 169 - Special Purpose Food Equipment and Devices.
- Stainless steel valve stem body for use with higher water pressure.
- Stainless steel drying rack.
- Rinser star design with a larger diameter and non-slip ridges.
- COLDWATER connector: 3/8" John Guest press fitting (hot water damages the seals).
- Drain connector: 1/2" barb fitting.
- Height of rinser plus fittings: 4".
- Outside dimensions of the pan only: 6-7/8" x 6-3/8" (average flange is 5/16").
- Recommended Water Pressure: 15-30 PSI.
- Made of stainless steel (edges can be sharp before installing please use caution).
- Remove white laser film before installing.
- Check with local plumbing codes before installation. PVB, SVB or RP style backflow preventers are sometimes required.
- Made of stainless steel.
- NSF International Certifies that this product conforms to the requirements of NSF/ANSI 169 - Special Purpose Food Equipment and Devices.
- Cut Sheet
- NSF Rinser Certification
- NSF SKU Certification
- NSF Factory Certification
){kind=link}